by alpha_9 | Jul 16, 2020
Scope/ Scope of application
Insulation of all internal walls of residential and industrial buildings within a temperature range of -20 ° C to + 150 ° C at places where mould and thermal bridges are formed.
Insulation of the supply and exhaust pipes of the house against heat loss and frost, such as insulation of roller shutter boxes and other cold bridges, etc.
- Effective thermal and hydro insulation with 2 mm application layer
- Easy to apply and time-saving
- Application on almost all types of materials
- Breathing mixture
- Resistant to abrasion, durable over time, washable
- Prevents mould
- Fire resistant
- Frost resistant
- Harmless to health
- May be combined with emulsion paints
- Serves as a finish and may be integrate in a system with other putties
Plastic bucket: 10l – 5l
Store in a closed or dry place in the original packaging, at room temperatures of +5°С to +45°С.
|Thermal resistance after setting||
-20 ° C to + 150 ° C without losing any of the declared performance characteristics
sweet, after nitrocellulose solvent
|Diffusion resistance equivalent||
sd = 0,16 m (1 mm layer) according to EN ISO 7783
min. 1.2 MPa according to ČSN 73 2577
|Minimum applied layer||
|Period of use after setting||
min. 15 years under normal conditions
between + 5 ° C and +45 ° C, without frosting
Unopened: For 2 years after production date
for all types of porous materials, wood and its by-products, metal surfaces, glass
|Suitable condition of surfaces||
clean, dry, free of grease or dust
+5 °C to +50 °C
not harmful to health according to ČSN 1230-1
fire-resistant according to ČSN EN 13501-1 + A1-
1. Basic preparation
First, the mixture is stirred at low speed with an eclectic paddle or trowel, with no added water, until getting thick.
The mixture is diluted with 10% water to 1 litre. It is stirred at a low speed. Subject to the absorption rate of the base and your practices, you can carefully change the consistency for better application by adding more water.
3. Application of mixture
Apply the mixture evenly, making a layer of min. 1.5 mm.
4. Drying time
The usual drying and setting time for a 1-mm layer is max. 24 hours. This depends also on the temperature and absorption of the base, the temperature and humidity of the air and the air flow.
All tools soiled with the product must be cleaned with water, and the dry product residues must be removed mechanically. After clean-up, surfaces must be rinsed with water.
6. Required quantity
1 litre per 1-3 m2 depending on the base
7. Applied in a system with Bloktherm grund for better adhesion
- Hazard statements / Safety tips
The product is safe and not hazardous to health at contact.
The product is not classified as harmful to the environment. It is neutral and non-flammable.