Characteristics

• Effective thermal and hydro insulation with 2 mm application layer
• Easy to apply and time-saving
• Application on almost all types of materials
• Breathing mixture
• Resistant to abrasion, durable over time, washable
• Prevents mould
• Hard-wearing
• Fire resistant
• Frost resistant
• Harmless to health
• May be combined with emulsion paints
• Serves as a finish and may be integrate in a system with other putties

Packaging
Plastic bucket: 10l – 5l

Color
White

Storage
Store in a closed or dry place in the original packaging, at room temperatures of +5°С to +45°С.

Technical data

Application

1. Basic preparation
First, the mixture is stirred at low speed with an eclectic paddle or trowel, with no added water, until getting thick.

2. Dilution
The mixture is diluted with 10% water to 1 litre. It is stirred at a low speed. Subject to the absorption rate of the base and your practices, you can carefully change the consistency for better application by adding more water.

3. Application of mixture
Apply the mixture evenly, making a layer of min. 1.5 mm.

4. Drying time
The usual drying and setting time for a 1-mm layer is max. 24 hours. This depends also on the temperature and absorption of the base, the temperature and humidity of the air and the air flow.

5. Tools
All tools soiled with the product must be cleaned with water, and the dry product residues must be removed mechanically. After clean-up, surfaces must be rinsed with water.

6. Required quantity
1 litre per 1-3 m2 depending on the base

7. Applied in a system with Bloktherm grund for better adhesion

Characteristics

• Effective thermal and hydro insulation with 2 mm layer of application
• Easy and time-saving application
• Application on almost all types of materials
• Breathing mixture
• Resistant to abrasion, durable over time, washable
• Prevents mould
• Hard-wearing
• Fire resistant
• Frost resistant
• Harmless to health
• May be combined with emulsion paints

Packaging
Plastic bucket: 10l – 5l

Colour
White

Storage
Store in a closed or dry place in the original packaging, at room temperatures of +5°С to +25°С.

Technical data

Application

1. Basic preparation
First, the mixture is stirred at low speed with an eclectic paddle or trowel, with no added water, until getting thick.

2. Dilution
The mixture is diluted with 10% water to 1 litre. It is stirred at a low speed. Subject to the absorption rate of the base and your practices, you can carefully change the consistency for better application by adding more water.

3. Application of mixture
Apply the mixture evenly, making a layer of min. 1.5 mm.

4. Drying time
The usual drying and setting time for a 1-mm layer is max. 24 hours. This depends also on the temperature and absorption of the base, the temperature and humidity of the air and the air flow.

5. Tools
All tools soiled with the product must be cleaned with water, and the dry product residues must be removed mechanically. After clean-up, surfaces must be rinsed with water.

6. Required quantity
1 litre per 1-3 m2 depending on the base

7. Applied in a system with Bloktherm grund for better adhesion